House painting in Oak Grove for interior or exterior decoration is available at your local hardware store, paint shops, and do-it-centers nation wide or local painting contractors.
Local painters will have a huge range of colors on their charts, which are made by blending the main tints and tones of their collection. Most paint companies will produce small test amounts of a color, especially if it is one of those, which you have requested to be mixed.
Good-quality Painter Contractor will keep your home looking great for many years and is used by professional painters.
Professional Painting in Oak Grove – Trusted Experts
Exterior house painting can make your home look great. You can change the color of your home, decks, shutters and trim to really make it "pop". You can personalize it by adding as much detail as you like, but appearance is not everything.
Painting your home is first about protection. And the best protection comes with the correct application of the paint. But, before there can be proper paint application, there has to be proper paint preparation.
To prepare your home for a fresh coat of paint it first should be cleaned thoroughly. The best method is pressure cleaning using a chlorine and TSP (trisodium phosphate) solution. Chlorine is used to kill and remove mildew from the painted surface while the TSP removes dirt, pollen, grease and other pollutants. The TSP also removes any glossy finish that will hinder proper adhesion of the new coating.
On your next exterior painting project, take the time to do it right and it will not only look great, but also last for many years. In the meantime, if you have any questions, please give us a call, we love to help.
Exterior House Painting - When to Call For Help
in this video by ABN Painting we are working on exterior a two-story stucco house and this is the look of the house before we started preparation work.
There's quite a bit of paint that is peeling especially around the trim a few holes in stucco.
On a back patio ceiling joint tape is missing, on the front patio ceiling there is a lot of peeling paint, metal side gate has a little bit of rust on the bottom.
We scraped any loose paint by hand and applied elastomeric patch to scraped areas to fix any hairline cracks.
To fix any larger cracks and in trim fascia we used latex caulk and after we squeezed it out of the tube using caulking gun we used the brush to spread it evenly throughout the trim.
We musked all windows using plastic and green tape.
Green tape gives approximately three days of clean removal.
If the tape is removed within three days from the windows it will not leave any residual glue.
Using green tape and 12-inch masking paper we masked off staircase and the wooden patio that will not be painted.
We masked off the unpainted block wall.
To protect the floor on the back patio we used paper around the perimeter and covered the middle witrh tarps.
After scraping loose paint near the foundation of the house we applied elastomeric patch.
The side of the house that belongs to the neighbor we covered with paper.
On the front of the house we covered with tarps all concrete surfaces.
To protect roof shingles from all spray we run a 12-inch masking paper next to the stucco and when we're ready to spray paint the second level we'll cover the rest of the shingles with tarps.
We fixed all holes in stucco using stucco mix.
On the front patio ceiling we scraped all loose paint.
Re-textured the ceiling using drywall mud and using latex caulk filled any gaps between the stucco and the drywall.
On the back patio ceiling after we applied joint tape we textured the ceiling as well.
We're sending both ceilings on the front as well as on the back before applying the primer.
To prime repaired areas on the ceilings we're using general-purpose primer ultra grip by Dunn Edwards.
It is of dark color for no specific purpose it is just leftovers from one of our previous jobs.
After we are done with priming we apply the first coat of paint of the body color.
Before spray-painting metal gate we're using an oil-based primer to cover the areas that are rusty.
After we are finished spray painting the body of the house we're using a mini roller and a brush to paint the trim fascia.
After were done with cleanup and touch-ups this is the look of the house.