House painting in Milwaukie for interior or exterior decoration is available at your local hardware store, paint shops, and do-it-centers nation wide or local painting contractors.
Local painters will have a huge range of colors on their charts, which are made by blending the main tints and tones of their collection. Most paint companies will produce small test amounts of a color, especially if it is one of those, which you have requested to be mixed.
Good-quality Painter Contractor will keep your home looking great for many years and is used by professional painters.
Professional Painting in Milwaukie – Trusted Experts
in this video by ABN Painting we are working on exterior a two-story stucco house and this is the look of the house before we started preparation work.
There's quite a bit of paint that is peeling especially around the trim a few holes in stucco.
On a back patio ceiling joint tape is missing, on the front patio ceiling there is a lot of peeling paint, metal side gate has a little bit of rust on the bottom.
We scraped any loose paint by hand and applied elastomeric patch to scraped areas to fix any hairline cracks.
To fix any larger cracks and in trim fascia we used latex caulk and after we squeezed it out of the tube using caulking gun we used the brush to spread it evenly throughout the trim.
We musked all windows using plastic and green tape.
Green tape gives approximately three days of clean removal.
If the tape is removed within three days from the windows it will not leave any residual glue.
Using green tape and 12-inch masking paper we masked off staircase and the wooden patio that will not be painted.
We masked off the unpainted block wall.
To protect the floor on the back patio we used paper around the perimeter and covered the middle witrh tarps.
After scraping loose paint near the foundation of the house we applied elastomeric patch.
The side of the house that belongs to the neighbor we covered with paper.
On the front of the house we covered with tarps all concrete surfaces.
To protect roof shingles from all spray we run a 12-inch masking paper next to the stucco and when we're ready to spray paint the second level we'll cover the rest of the shingles with tarps.
We fixed all holes in stucco using stucco mix.
On the front patio ceiling we scraped all loose paint.
Re-textured the ceiling using drywall mud and using latex caulk filled any gaps between the stucco and the drywall.
On the back patio ceiling after we applied joint tape we textured the ceiling as well.
We're sending both ceilings on the front as well as on the back before applying the primer.
To prime repaired areas on the ceilings we're using general-purpose primer ultra grip by Dunn Edwards.
It is of dark color for no specific purpose it is just leftovers from one of our previous jobs.
After we are done with priming we apply the first coat of paint of the body color.
Before spray-painting metal gate we're using an oil-based primer to cover the areas that are rusty.
After we are finished spray painting the body of the house we're using a mini roller and a brush to paint the trim fascia.
After were done with cleanup and touch-ups this is the look of the house.
Preparation work and spray painting stucco house with wood trim.
In this video by ABN Painting we're doing preparation work and spray painting exterior of a stucco house and the first thing we do for prep work is we move the gravel away from the house so it doesn't get any overspray.
Pressure washing is next.
Any paint that is peeling we scrape by hand using a putty knife.
We scrape the different angles to make sure that anything that is peeling will come off.
After we're finished with scraping we're using elastomeric punch to fill all hairline cracks in stucco and we apply it with a mini roller.
There are some areas on this house where there is countless number of cracks and we have to apply the patch pretty much from the very bottom of the house all the way to the top.
To fill smaller cracks in the wood trim we use the same elastomeric patch and we apply it with a brush because the mini roller on the round surface like that would not work very well.
To fix larger cracks in the wood trim we are using MH patch and we apply it with a putty knife.
Once we're done fixing larger cracks we'll come back to this area again and will fill all remaining small cracks using latex caulk and elastomeric punch.
After we finished with all repairs this is the look of the house.
After we're done masking the surfaces that will not be painted we start by spray painting the body of the house and the walls around.
After the body of the house had the chance to dry we mask off any surfaces next the wood trim to prepare for spray painting an accent color.
We use 12 inch masking paper to cover the stucco right next to the wood trim.
We used plastic to cover the rest of the area and for all the floors we use the tarps.
To spray paint the trim who is slightly lowered the pressure in the sprayer but we're using the same size of the spray tip as for the body of the house.
Most of the time it's easier using a brush in the mini roller to paint the trim fascia by hand but on this house we masked off the roof using 12 inch masking paper and green tape and we'll spray paint the trim fascia instead.
Here we spray painting the gates on the front of the house.
When spray painting the trim around the front door we covered with plastic any plans that may get overspray.
After we're finished with touch ups and clean up this is the look of the house.
This is the guest house.
And this is the main house.